← Back to blogNoedal · Regulatory Insights

FDA Fragrance Allergen Labeling: Get Your Formula and Packaging Ready

What could change on your ingredient panel, what the EU and Canada already require, and what to ask your manufacturer before the next print run.

Gordon LiGordon LiNovember 15, 2026Seoul, South Korea (Asia/Seoul)7 min read
FDA Fragrance Allergen Labeling: Get Your Formula and Packaging Ready

How this will affect cosmetic labels

Some ingredient panels will need more space. A fragrance blend currently shown as “Fragrance” or “Parfum” may also need individual allergen names, depending on the market and their amount in the finished product. That means getting better information from suppliers, checking each formula and leaving enough room on the tube, bottle or carton.

For a brand, the practical risk is printing packaging before that information is ready. For a manufacturer, it is being asked for a complete allergen breakdown when the fragrance supplier has only provided an older declaration.

On the ingredient panel
Grouped fragrance declarationINGREDIENTS

Aqua, Glycerin, …
Parfum

Where individual disclosure appliesINGREDIENTS

Aqua, Glycerin, …
Parfum, Linalool, Limonene

Illustrative ingredient-list fragments, not a finished label or a confirmed US requirement. Actual names and ordering depend on the full formula, concentrations and destination rules.

The EU and Canada already have expanded disclosure requirements. The US federal rule is still in preparation in the official agenda checked for this article. Keep those timelines separate when approving artwork. FDA rulemaking agenda; European Commission guidance; Health Canada guidance.

Where the FDA rule stands

MoCRA directs FDA to decide by regulation which fragrance allergens must be named. The law set 29 June 2024 as the proposal deadline. The current agenda lists November 2026 as its target. An agenda entry is a planning date; it does not publish a proposal or establish a compliance deadline. We did not find a published proposal in the official sources checked on 15 November 2026. MoCRA labeling provision; RIN 0910-AI90.

The US list, thresholds and transition dates need to be read from the rule when it is published. Avoid booking a packaging change around an assumed 2028 start date. Existing US ingredient-label rules still apply, including the current provisions for declaring fragrance. FDA Cosmetics Labeling Guide.

What you can do now

Collect the allergen data, calculate finished-product amounts and prepare editable artwork. Wait for the actual US requirements before signing off a US-specific allergen change.

Check the markets you already sell in

One formula. Different obligations.
RulemakingUS federalTarget: November 2026

FDA agenda target for a proposal. No final label-change deadline established by that entry.

Official guidance ↗
Label disclosureEuropean Union31 July 2026 · 31 July 2028

Expanded list applies to new market placement; qualifying existing stock has a 2028 sell-through deadline.

Official guidance ↗
Label disclosureCanada12 April 2026 · 1 August 2026

First 24 allergens, then 81 for new products. The expanded list applies to existing products from 1 August 2028.

Official guidance ↗
Product reportingCalifornia2026 · 2028

CFFIRKA reporting for fragrance allergens. Check CDPH rules for the list and product introduction date.

Official guidance ↗
Keep the US proposal target separate from other markets’ compliance dates. Each card links to the applicable official conditions.

For EU disclosure, covered allergens are individually named when they exceed 0.001% in leave-on products or 0.01% in rinse-off products. The expanded rules also include grouping and naming instructions. A spreadsheet containing only the older allergen list will miss part of the review. EU fragrance-allergen guidance.

Canada uses the same concentration thresholds for the listed allergens, with its own dates and labeling details. Check the Canadian ingredient list and notification information rather than assuming an EU carton is ready for Canada. Health Canada’s labeling guide and allergen lists.

California: reporting, labeling and ingredient restrictions need separate checks

CFFIRKA requires reporting of covered fragrance and flavor ingredients and fragrance allergens through the California Safe Cosmetics Program. For allergens, CDPH describes reporting at or above the applicable concentration threshold, including when the substance has another function. Reporting a product does not mean FDA has approved it. Creating a CSCP company account does not report the product. CDPH compliance FAQ.

Assess the California Safe Cosmetics Act and CFFIRKA separately; do not carry an exemption from one into the other without checking it. Ingredient bans are a further check. For example, California’s prohibition on intentionally added butylphenyl methylpropional, often called Lilial, starts on 1 January 2027. Adding an allergen name to a label cannot make a prohibited ingredient acceptable. CDPH reporting guidance; DTSC’s ingredient review, Lilial section.

Ask suppliers for numbers you can use

Send one clear request for each fragrance, essential oil and other relevant raw material. Ask for the exact material code and version, the allergen list assessed, the concentration of each listed allergen and the date of the declaration. Ask how the supplier will notify you if the composition changes.

An IFRA certificate can be useful, but it does not replace the detailed composition information needed to calculate label declarations. If a supplier provides ranges, ask your reviewer which value to use and record that decision. If the data is incomplete, keep the artwork review open.

Brand

Provide every destination market, SKU, pack size and planned print date.

Manufacturer

Match supplier declarations to the production formula and calculate the finished-product totals.

Artwork reviewer

Check required names, grouping, readability and the correct version for each market.

Calculate the amount in the finished product

A worked concentration example
0.5%Fragrance in the product
8%Linalool in that fragrance
0.04%Linalool in the finished product
0.5 × 8 ÷ 100 = 0.04%. Add contributions from every other ingredient too. This is arithmetic, not a US labeling threshold or a compliance verdict.

In that example, 0.04% is above both EU disclosure thresholds. A second example: a rinse-off product with 1% fragrance containing 0.5% citral has 0.005% citral from that fragrance. That is below the EU rinse-off threshold, but you still need to add any citral from other ingredients. The result can change when the fragrance level or supplier changes.

Include contributions from botanical extracts and essential oils. “No added fragrance” on a brief is not enough to rule out a listed allergen. Check the actual composition and review any fragrance-free or sensitive-skin claims separately.

Prepare the next print run without wasting packaging

  1. Choose the exact formulas. Link each SKU to its formula version, supplier declarations and current artwork.
  2. Resolve missing data. Give the manufacturer or supplier a named owner and a date to return it.
  3. Build the market labels. Use confirmed requirements for each destination. Leave room for longer ingredient panels without shrinking them beyond readability requirements.
  4. Plan the stock change. Record where existing packs may still be sold and which production run gets the new artwork.
  5. Keep one approved record. Save the calculation, source rules, final label and approval together. Recheck them when the formula, supplier or law changes.

A shared design can reduce packaging work where the rules allow it. Confirm each market’s requirements before treating one label as a global label.

Get the formula and label ready together

Bring your ingredient list, supplier allergen declarations and current packaging. Noedal can help identify the missing information and plan the review for your target markets.

Talk to Noedal

This article covers general preparation, based on sources checked on the date above. A product-specific review must use the applicable rules and the actual finished formula.